Cloudmon Probe System Requirements
The system requirements for deploying Cloudmon probes in the self-hosted option have been given below, considering a variety of deployment scenarios. These requirements are designed to help organizations select appropriate configurations for their specific monitoring goals in their environment.
|
Small
(up to 250 nodes)
|
Medium
(up to 1000 nodes)
|
Large
(up to 5000 nodes)
|
Probes
|
CPU: 4 cores
RAM: 16 GB
Storage:
SSD with at least 250 GB capacity
|
CPU: 8 cores
RAM: 32 GB
Storage:
SSD with at least 500 GB capacity
|
OS: Ubuntu
22.04 LTS
Network requirements:
Outbound - 80, 443 and monitored ports, Inbound: UDP/2055
(for Netflow), UDP/514 (Syslog), UDP/162 (SNMP Trap).
Internet access - https://pro.ip-api.com
|
Note:
- For
Deployments larger than 5000 nodes and Availability contact sales@veryxtech.com
- The
listed minimum server requirements are based on a default configuration.
Significantly increasing the monitors, or the frequency of statistic
collection may add extra load to the server, which could necessitate a larger
CPU or additional memory.
- The storage size required depends
on several factors: the duration for which data is retained, whether debug
logging is enabled, and the overall volume of data being stored.
|
Related Articles
Cloudmon Controller System Requirements
The following information outlines the system requirements for the self-hosted option, enabling IT teams to install Cloudmon in their environment. These system requirements have been determined keeping various deployment scenarios in mind to help ...
Cloudmon Pilot system requirements
The following describes the system requirements typically required for Cloudmon pilots to be done in the self-hosted model. Cloudmon Controller installation without Network Traffic flow Monitoring Category Requirement CPU 4 cores (6 cores ...
Cloudmon agent system requirement
The system requirements for deploying Cloudmon Agents in the self-hosted option have been given below, considering a variety of deployment scenarios. These requirements are designed to help organizations select appropriate configurations for their ...
How to install a probe in cloudmon?
The Cloudmon Probe is pre-installed with Cloudmon All-in-One installation. However, for scalability and to monitor your endpoints from multiple locations, you can install multiple probes and add them to the Cloudmon ITIM controller. We recommend ...
How can I add a probe in cloudmon?
You can add a probe by installing the probe on the server and Once the probe has been installed, add the corresponding IP in the cloudmon portal by navigating to settings > monitoring > probes and click on the "+" icon in the top right corner and ...