Is it possible to discover Layer-2 devices using Cloudmon?

• Related Articles

• Is it possible to automatically discover devices in our network using Cloudmon?

  Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...

• How to create and view the network topology in Cloudmon?

  Configure a seed router using SNMP credentials. Using this see router Cloudmon can identify all the link details for connected network devices using CDP and LLDP protocols. Cloudmon will automatically discover the topology map and display it. Refer ...

• Can Cloudmon monitor Network Devices?

  Yes, Cloudmon can monitor network devices like Firewalls, Servers, Switches and Routers etc. using SNMP.  For network devices which do not support SNMP, Cloudmon can perform availability using IP Endpoint monitoring feature. In addition, Cloudmon is ...

• How to initiate Network Discovery?

  i) Hover on Settings > Monitoring > Network discovery ii) Click on + icon in the top right corner for adding a new discovery iii) Provide the IP range needed and the Protocol to be used for discovery iv) The supported protocols for discovery are ...

• What is an SNMP ? How to configure an SNMP Credentials in cloudmon?

  SNMP, which stands for Simple Network Management Protocol, is a widely used internet standard protocol for managing and monitoring network devices that are connected via IP. These devices can include routers, switches, firewalls, load balancers, ...