How to initiate Network Discovery?

i) Hover on Settings > Monitoring > Network discovery

ii) Click on + icon in the top right corner for adding a new discovery

iii) Provide the IP range needed and the Protocol to be used for discovery

iv) The supported protocols for discovery are ICMP, TCP & SNMP

Refer Network Discovery for more details.

Related Articles
Is it possible to automatically discover devices in our network using Cloudmon?
Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...
How to create and view the network topology in Cloudmon?
Configure a seed router using SNMP credentials. Using this see router Cloudmon can identify all the link details for connected network devices using CDP and LLDP protocols. Cloudmon will automatically discover the topology map and display it. Refer ...
How to discover and specify network devices for monitoring?
Go to the Add Discovery form and select Host as the type, and SNMP as the protocol. Add SNMP credentials, initiate discovery, and then use the Select All option in the Discovery Devices table to add the devices to monitoring.
Is it possible to discover Layer-2 devices using Cloudmon?
Yes, Layer 2 devices (e.g., LAN switches) can be discovered from Cloudmon. refer Network Discovery for more details
Is there a need for configuration to initiate agent discovery?
No configuration is required for agent discovery; once the agent is installed, it will be automatically discovered.

Related Articles