How to discover and specify network devices for monitoring?

How to discover and specify network devices for monitoring?

  1. Go to the Add Discovery form and select Host as the type, and SNMP as the protocol.
  2. Add SNMP credentials, initiate discovery, and then use the Select All option in the Discovery Devices table to add the devices to monitoring.

    • Related Articles

    • Is it possible to automatically discover devices in our network using Cloudmon?

      Yes, Cloudmon supports two types of network discovery Network Discovery using ICMP, TCP & SNMP protocols - Cloudmon detects most devices in your network. Devices discovered using ICMP & TCP could be added to availability monitoring in bulk from the ...

    • Can Cloudmon monitor Network Devices?

      Yes, Cloudmon can monitor network devices like Firewalls, Servers, Switches and Routers etc. using SNMP.  For network devices which do not support SNMP, Cloudmon can perform availability using IP Endpoint monitoring feature. In addition, Cloudmon is ...

    • What is an SNMP ? How to configure an SNMP Credentials in cloudmon?

      SNMP, which stands for Simple Network Management Protocol, is a widely used internet standard protocol for managing and monitoring network devices that are connected via IP. These devices can include routers, switches, firewalls, load balancers, ...

    • How to initiate Network Discovery?

      i) Hover on Settings > Monitoring > Network discovery ii) Click on + icon in the top right corner for adding a new discovery iii) Provide the IP range needed and the Protocol to be used for discovery iv) The supported protocols for discovery are ...

    • Is it possible to discover Layer-2 devices using Cloudmon?

      Yes, Layer 2 devices (e.g., LAN switches) can be discovered from Cloudmon. refer Network Discovery for more details